Home arrow Forum
FireBoard
Welcome, Guest
Please Login or Register.    Lost Password?
FireBoard Race The Social Climber - Race Magazine's Unofficial Project!
Wishbones (1 viewing) (1) Guest
Go to bottom Post Reply Favoured: 3
TOPIC: Wishbones
#4921
Ben Wilson (User)
Platinum Boarder
Posts: 575
graphgraph
User Offline Click here to see the profile of this user
Re:Wishbones 1 Year, 9 Months ago Karma: 4  
Ezakimak wrote:
Any ideas on how this works ?

I think that would be for the bearings which have a staking ridge on the outer edge.
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#4922
dave_vic_ozz (User)
Platinum Boarder
Posts: 1001
graphgraph
User Offline Click here to see the profile of this user
Re:Wishbones 1 Year, 9 Months ago Karma: 3  




Jasko has been busy.

After Powelltown flying visit Jasko and I wondered how to stake the bearings in place.
We knew an idea would come, and Jasko has solved it.

Shoulders have been machined into the cup.
This leaves enough material to stake the bearings in place and a face to weld the wishbone tube.

Win x 2.

Dave
 
Report to moderator   Logged Logged  
 
our goals are -

Build a safe and reliable, entry level, Hill Climber and Track Day car.
Where possible, using off the shelf items to keep the cost down.
Build now, with a view to give the next owner great value when we move onto the next project.
  The administrator has disabled public write access.
#4924
dave_vic_ozz (User)
Platinum Boarder
Posts: 1001
graphgraph
User Offline Click here to see the profile of this user
Re:Wishbones 1 Year, 9 Months ago Karma: 3  
BTW. the drawing is not the bush. just happened to be a white back ground.
 
Report to moderator   Logged Logged  
 
our goals are -

Build a safe and reliable, entry level, Hill Climber and Track Day car.
Where possible, using off the shelf items to keep the cost down.
Build now, with a view to give the next owner great value when we move onto the next project.
  The administrator has disabled public write access.
#4925
admin (Admin)
Admin
Posts: 883
graphgraph
User Offline Click here to see the profile of this user
Re:Wishbones 1 Year, 9 Months ago Karma: 1  
I think I will need an explanation of how it works...
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#4926
Callumgw (User)
Platinum Boarder
Posts: 811
graphgraph
User Offline Click here to see the profile of this user
Re:Wishbones 1 Year, 9 Months ago Karma: 0  
Does the bearing sit in the centre ring? and the ledge of that ring is staked. Then the extra flange allows for the full face weld of the wishbone tubes.

C
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#4927
Callumgw (User)
Platinum Boarder
Posts: 811
graphgraph
User Offline Click here to see the profile of this user
Re:Wishbones 1 Year, 9 Months ago Karma: 0  
ohh, send me some dimensions and I'll pop it into the drawings. Are you guys are not going for vertical bolts at all wishbone locations?
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop
 
Advertisement